|
Gunite Model 634 Specifications
Dry-Mix Gunite Machine
 Reed SOVA CONFIGURATIONS- Small Open Vertical-Feed Air-Powered
| # |
Feed Bowl |
Hose Size
|
Max. Aggregate
|
Air Compressor
|
Max. Output
|
Common Applications
|
| |
Pockets |
(I. D.) |
Size |
(Recommended size @ 100 psi |
| 1 |
18 |
3/4" (1.9cm) |
1/8" (3.5mm) |
125 cfm (3.5m3/min) |
2yd 3/hr (1 .5m3/hr) |
detailed artistic work |
| 2 |
18 |
1" (2.5cm) |
1/4" (7mm) |
210 cfm (6.0m3/min) |
yd 3/hr (1.5m3/hr) |
detailed artistic work |
| 3 |
18 |
11/4" (3.2cm) |
1/4" (7mm) |
315-375 cfm (9-11m3/min) |
6yd 3/hr (4.6m3/hr) |
Refractory spraying |
| 4 |
16 |
11/4" (3.2cm) |
1/4" (7mm) |
315-375 cfm (9-11m3/min) |
6yd 3/hr (4.6m3/hr) |
Refractory spraying |
| 5 |
16 |
11/2"(3.8cm) |
3/8"(10mm) |
315-375 cfm (9-11m3/min) |
9yd 3/hr (6.9m3/hr) |
Refractory spraying |
* Subtract roughly 90 SCFM (2.5M/MINI from air requirement if electric model is used. Additional air may be required depending on altitude and atmospheric pressure. **Feed Bowl, material, air system, nozzleman capability together determine maximum output.
Specifications subject to change without prior notice.
|
MODEL
|
|
SOVA
|
|
Maximum Horizontal Conveying Distance
|
ft. m
|
1000+ 305+
|
|
Maximum Vertical Conveying Distance
|
ft. m
|
300+ 91+
|
|
Drive System
|
|
5 hp, 8 AM Rotary Vane Motor, Sealed Spur Gear
|
|
Hopper
|
|
Continuous Feed
|
|
Gross Weight (Approx.)
|
lbs kg
|
425 193
|
Maximum theoretical performance shown above. Performance will vary depending on slump, mix design and delivery line diameter.
Specifications subject to change without prior notice.
Operating Principle:
REED's SOVA dry mix gun has the same basic operating principle that has made its LOVA-style gun so successful throughout the world.
1. The dry mix is fed through a hopper into the pockets of the rotary feed wheel.
2. The rotary feed wheel, driven by a heavy-duty oil bath gear drive, rotates the mix under the conveying air inlet and material outlet.
3. With the introduction of single source compressed air, the mix is evacuated from the feed wheel pockets and then travels through the outlet.
4. The dry mix is then conveyed in suspension through the dry mix hose to the shotcrete nozzle where water is introduced.
|
